Answer: We envisaged the remote control packaged with our soundbars/soundbase would be used infrequently in favour of the TV's own remote where possible. There are also other options available such as universal remote controls, these are remotes that ...
Answer: The simplest way to programme your Virginmedia V6 remote to work with your Q media device is by searching for the correct code. Make sure your soundbar/soundbase and your Virgin Media box are switched on and connected using and appropriate ...
Answer: QED is our sister company and we always recommend it as many of the products have been developed together with Q Acoustics. In order of priority, we would always recommend using the best single wire speaker connection you can afford. We ...
You don't really need to run in any loudspeakers, but we expect loudspeakers to sound a little better after approximately 72 hours of use. Normally 72 hours of use, not necessarily continuous, but should be at quite a high (realistic listening) ...
Answer: The wall bracket parts are almost identical between the Q 2000WB, 3000WB and WB50. The 2000/2000i terminals are in a cavity underneath so, with 2000WB we supplied metal plates to cover these and the bracket/speaker fixing such that you didn’t ...
Answer: Changing an E50 system to E60 is very easy as E60 fits into the same back box as E50 and uses the same connections for *speakers and line auxiliary input. You will however need a small adaptor for the power supply, as E60 uses a slightly ...
Answer: E60 can be used with speakers and a subwoofer. You will need an amplified subwoofer with a gain and crossover control, most powered subwoofers will have this, and all Q Acoustics powered models have these facilities. You will need an analogue ...