3000 - Q. What is the cabinet width of a 3050 without the stabilizer (outrigger) in place?

• Related Articles

• 3000i - Q. What is the cabinet width of a 3050i without the stabilizer (outrigger) in place?

  Answer: The width of the 3050i without the stabilizer (outrigger) in place is 200mm, we do not advise using the loudspeakers without the stabilizer being fitted. ​

• 3050/3050i - Q. What is the size of the bolt used to secure the stabilizer (Outrigger)?

  Answer: The bolt/screw used to secure the stabilizer (outrigger) on the 3050/3050 is an M6 x 12mm Button Head type.

• 3000/3000i - Q. Are the rear outrigger brackets detachable for the Q3050 and Q3050i loudspeakers?

  Answer: The outrigger/stabilizer has to be in place, otherwise the loudspeaker will become unstable and could cause injury. The outrigger/stabilizer can be fitted to either the rear or forward position to allow easier placement.  Additional ...

• 3030i - Q. What is the width of the flat part of the 3030i base?

  Answer: As the 3030i is designed to be curved at the sides, the "flat" width is approximately 145.5mm.

• 3000/3000i - Q. Dirty marks have appeared at the magnet points on the cabinet where the grille would usually fix?

  Answer: Q Acoustics loudspeakers where magnetic grilles are supplied, but the grilles are not in use. Customers may find over time that dust gets attracted to the magnet positions that are below the finish of the cabinet, this is especially so in ...