Answer: The LED flash pattern indicates that the optical input is receiving multichannel or Dolby Digital audio which cannot be played. Quite often, HD (film channels in particular) send audio in Dolby 5.1. One of the reasons that the M20/M40 sound ...
Answer: All Q Active systems use a high-resolution audio wireless link between the hub and the speakers. In order to maintain the 24bit 96KHz wireless link, the hub and speakers use a 22MHz wide band on the following three possible frequencies: 5.736 ...
Yes! Simply plug in either an optical cable (you can use the supplied TOSLINK to Mini TOSLINK adaptor) or an analogue cable with 3.5mm stereo jack into your source. Once plugged in, simply select the Auxiliary input using the E300 remote control, ...
Answer: We think getting audio via HDMI from a Sony TV is critical in getting it to convey the sound. Here's an extract from Sony's website: The Audio Return Channel (ARC) feature allows you to transfer audio from the TV to a Home Theatre receiver ...
Answer: First thing to check is to ensure that the new 'MESH' wi-fi system is the only active network, if you are still seeing the original routers wi-fi name (SSID), you need to turn that off via the routers settings page, please follow the ...