3000/3000i Series - Feet, Fixings and Stands

3000(i) Feet & Fixings

The foot thread on 3010, 3020 & 3090C is M4
The thread for the spikes and feet on the 3030FSI & 3000ST stands, 3050 & 3050i loudspeakers is M6 (thread pitch 1.0mm)
The thread for fixing the wall bracket is M8 

3010i Feet

           The rubber feet extend approximately 3mm from the base.

3000FSi Stands

            The dimensions of the top plate are below:

• Related Articles

• 2000i Series - Feet, Fixings and Stands

  2010i, 2020i Feet The feet on the 2010i and 2020i accept an M4 thread. 2050i Feet The threaded insert used for spikes is M6. An alternative solution for stability and sound quality is to replace the feet with a material like Bostik Blue Tack. Office ...

• Concept Stands - Q. What are the weight and dimensions of the Concept 20 Speaker stands?

  Answer: Each stand is 10.8kg (23.81lb), and the boxed weight of a pair of Concept 20 stands would be 22.5kg (49.60lb). The overall dimensions of each stand is 655mm (25.79in) x 240mm (9.45in) x 386mm (15.20in). The dimensions of the top plates are ...

• 7000i - Q. What size are the rubber feet and spiked feet for the 7000ST stands?

  Answer: The spike length is 2.3cm, the screw thread is 0.5mm The black round rubber feet are 1cm diameter The screw thread is 0.5mm

• WB75 - Q. What wall fixings are used?

  WB75 - Used for the wall mounting of Q Active 200, Concept 30, Concept 90, 5020, 5090 Due to the many different wall construction types we do not provide any sort of fixing, but advise you to contact your local hardware store and ask for a ...

• Q Media M2 - Q. What are the size of the Q m2 feet and can they be removed?

  Answer: The feet are like a shallow cone and are 25mm high. The diameter where each foot is attached to the Q m2 is 55mm and the diameter of its rubber inset foot is 23mm. Because of the downward facing enhanced bass driver, the Q m2 cannot be used ...