Q Install - Q. How do I use the Q Install Fire & Acoustic Hoods?
Answer:
When installing in-ceiling loudspeakers with our fire & acoustics hoods, you can either feed the speaker cable between the gaps under the hood
when it is in the ceiling void, or alternatively if you would rather
feed the cable through the top of the hood, you would make incisions
underneath the square fabric at the top of the hood (by lifting a
corner of the square protective fabric and making a hole underneath it).
For more information on installing and using the Q Install Fire & Acoustic Hoods, please refer to the attached diagrams.
Related Articles
QInstall - Q. Do the inceiling speakers meet IC4 rating for install into insulation?
Answer: As far as we understand it, the IC4 rating is for active electrical items such as halogen lamps that can get really hot. You would not want insulation materials such as polystyrene touching a halogen lamp as it would melt and possibly catch ...
Q Install - In-Wall and In-Ceiling Installation Guides
Instructions for the setup, use and care of your Q Acoustics Q Install Series loudspeakers.
Q Install - Loudspeaker Specifications
Please find attached the specifications for the following loudspeaker models: Qi65CB, Qi65, Qi65 ST, Qi80, Qi65CP, Qi65CP ST, Qi80CP, Qi50CW, Qi65CW, Qi65CW ST, Qi45EW, Qi65EW, Qi65LW, Qi65RP, Qi80RP, QiSUB80SP, Qi65LCR
E120 - Installation Guide
Please find attached a guide covering the installation of the E120 system.
Q Install - In-Ceiling Speakers Brochure
Please find attached the brochure for the Q Install In-Ceiling Speakers.