M20 - Q. How do I remove the Bluetooth pairings from my M20 HD loudspeakers?
Answer:
You can clear all the devices from the Bluetooth pairing list memory if required by using the following steps:
1. Put the speakers into Bluetooth pairing mode with a long press of the BLU source button on the remote control, the LED will be flashing Blue.
2. Press and hold the BLU source button on the remote control again, until the LED goes out and then flashes three times.
The Bluetooth pairing list is now cleared from the memory and devices must pair again in order to connect.
Related Articles
Q Media - Q. How can I remove Bluetooth pairings from my Q Media product?
Answer: To clear Bluetooth pairings, press and hold the 'Pair' button at the rear of the unit for around 10 seconds, if this does not work on your particular system, please also try pressing and holding the Vol+/Vol-/Source buttons all together for ...
Q Acoustics M40 HD Loudspeaker User Manual
Instructions for the setup, use and care of your Q Acoustics M40 HD active speakers. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
Q Active - Q. Are these loudspeakers Bluetooth?
Answer: The actual loudspeakers themselves are not Bluetooth, but the Hub to which they connect to is, it uses Bluetooth version 4.1 For a helpful video on how to use your Q Active system with Bluetooth, please take a look here
Q Acoustics M20 HD Loudspeaker User Manual
Instructions for the setup, use and care of your Q Acoustics M20 HD active speakers. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
M20/M40 - Q. What resolution is my system capable of via Bluetooth, USB and optical connections?
Answer: Wireless via Bluetooth (up to 24-bit/48kHz) USB (up to 24bit/192kHz) Digital optical (up to 24bit/192kHz)