Q. The centre of my low frequency driver (cone) has been pushed in, is this a problem?
Answer:
On the low and mid frequency drivers, the centre portion is purely a dust cap and should not affect the
sonic performance of the loudspeaker.
Should you wish to replace the driver at your cost you'll need to advise us of where you are based so
that we can put you in touch with the local representative if available
in your territory.
Related Articles
Q. My tweeter cone has been pushed in, how can I reverse this?
Answer: There are a few things which you can try in this instance. Firstly, try taking a hairdryer to the dome. With the temperature set to a high setting, aiming directly at the dome, try to heat the dome as the air behind the dome will expand and ...
Concept Centre - User Manual
Instructions for the setup, use and care of your Q Acoustics Concept Centre channel loudspeaker. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
Q Acoustics M20 - User Manual
Attached is the User Instruction Manual for the Q Acoustics M20 loudspeakers.
Q Acoustics BT3 Active Speaker User Manual
Instructions for the setup, use and care of your Q Acoustics BT3 active speakers. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
Q Acoustics M20 HD Loudspeaker User Manual
Instructions for the setup, use and care of your Q Acoustics M20 HD active speakers. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.