Q Active - Q. Can I connect a passive subwoofer to the system Hub?
Answer:
An RCA subwoofer out is provided on the system Hub, this is used in conjunction with a powered type subwoofer with Line level/LFE input, it cannot be used directly with a passive subwoofer. The system Hub subwoofer output uses a 2nd order low pass-filter set to -6dB @ 450Hz.
Related Articles
Q Active Hub - LED states and what they mean.
The attached document should be used in conjunction with the supplied user manual which also contains relevant information. The document sets out the standard Q Active Hub LED states that you might see during the course of using your equipment
Q Active - White Paper
Please find attached the white paper for the Q Acoustics Q Active range, including the design brief, speaker overview, connectivity and much more! Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and ...
Q Active - Q. Can I turn the LED's off on the Q Active Hub?
Answer: Although the LED's cannot be turned off permanently, it is possible to have them extinguish after 20secs of no interaction with the remote, loudspeaker touchpad and Hub buttons, but if you do use the remote or Hub buttons, the LED's will ...
Q Acoustics Q B12 Active Subwoofer User Manual
Attached are the instructions for the setup, use and care of your Q Acoustics Q B12 Active Subwoofer. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
Q Acoustics BT3 Active Speaker User Manual
Instructions for the setup, use and care of your Q Acoustics BT3 active speakers. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.