Q Active - Q. Can I change the initial turn on volume of each source input on my Q Active system?
Answer:
Yes, it's possible to alter the initial turn on volume of each source accessed via Q Active (please note sources such as Bluetooth and NET may also be effected by the volume of the connecting device). In order to make these changes you must have already downloaded and installed the Q Active App for iOS/Android on a device that has access to the same system. Open the Q Active App, and your system/s will be displayed on the initial page 'Connected Speakers', tap on the settings cog wheel icon and you'll open the 'General Settings' page, now tap on 'Source Configuration' and this will open 'Source Settings'. Under each of the sources is a volume slider going from 'Zero' extreme left to 'Max' on the extreme right along with a 'Turn on volume' toggle for each, slide the toggle to on (swipe right, white background shows it's now engaged), and now set the desired turn on volume to be used, carry out the same for each source where you want initial volume set.
Related Articles
Q Active - Q. Can I turn off the source auto-switching when an audio signal is sensed?
Answer: The Q Active Hub has a source auto-switching function when audio signals are sensed, this can be a useful feature, but in some circumstances it might be an unwanted feature that you may wish to turn off. This is possible through the Q Active ...
Q Active - Q. How do I turn off the audible source selection tones?
Answer: To turn off the audible tones heard when changing source or when altering standby state, open the Q Active app, from the list of discovered Q Active systems, tap on the settings cog wheel icon for the chosen system, now scroll to the bottom ...
Q Active - White Paper
Please find attached the white paper for the Q Acoustics Q Active range, including the design brief, speaker overview, connectivity and much more! Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and ...
Q Acoustics BT3 Active Speaker User Manual
Instructions for the setup, use and care of your Q Acoustics BT3 active speakers. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
Q Active - Q. Can I turn the LED's off on the Q Active Hub?
Answer: Although the LED's cannot be turned off permanently, it is possible to have them extinguish after 20secs of no interaction with the remote, loudspeaker touchpad and Hub buttons, but if you do use the remote or Hub buttons, the LED's will ...