Q Active - Q. How do I turn off the audible source selection tones?
Answer:
To turn off the audible tones heard when changing source or when altering standby state, open the Q Active app, from the list of discovered Q Active systems, tap on the settings cog wheel icon for the chosen system, now scroll to the bottom of the settings page where you'll find 'Alert Sounds', tap the 'ON' toggle to move it between on and off.
Related Articles
Q Active - Q. Can I turn off the source auto-switching when an audio signal is sensed?
Answer: The Q Active Hub has a source auto-switching function when audio signals are sensed, this can be a useful feature, but in some circumstances it might be an unwanted feature that you may wish to turn off. This is possible through the Q Active ...
Q Active - Q. Can I change the initial turn on volume of each source input on my Q Active system?
Answer: Yes, it's possible to alter the initial turn on volume of each source accessed via Q Active (please note sources such as Bluetooth and NET may also be effected by the volume of the connecting device). In order to make these changes you must ...
Q Active - Q. Can I turn the LED's off on the Q Active Hub?
Answer: Although the LED's cannot be turned off permanently, it is possible to have them extinguish after 20secs of no interaction with the remote, loudspeaker touchpad and Hub buttons, but if you do use the remote or Hub buttons, the LED's will ...
Q Active - White Paper
Please find attached the white paper for the Q Acoustics Q Active range, including the design brief, speaker overview, connectivity and much more! Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and ...
Q Active Hub - LED states and what they mean.
The attached document should be used in conjunction with the supplied user manual which also contains relevant information. The document sets out the standard Q Active Hub LED states that you might see during the course of using your equipment