Q Active - Q. Why is the audio output from my turntable connected to the Hub so low?
Answer:
Firstly, please check that switch by the analogue (phono) inputs on the rear of the Hub are set to MM and that you are using a Moving Magnet (MM) cartridge. Secondly, check to see if your cartridge is Moving Coil (MC), if it is, you will need a compatible phono pre-amplifier which will need to be plugged in between the turntable and Hub.
Related Articles
Q Active - Q. Can I connect a turntable fitted with a moving coil (MC) cartridge as I can only see moving magnet (MM) mentioned?
Answer: Although the RCA toggle switch shows an MM (moving magnet) position on the hub, should you have a turntable equipped with a moving coil (MC) you will require and a phono pre-amp that would sit between the turntable and the Hub ensuring that ...
Q Active - White Paper
Please find attached the white paper for the Q Acoustics Q Active range, including the design brief, speaker overview, connectivity and much more! Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and ...
Q Active - Instruction Manual [ENGLISH]
Attached is the Q Active Instruction Manual in English. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
Q Active - Instruction Manual [DUTCH]
Attached is the Q Active Instruction Manual in Dutch. Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and images are protected under copyright.
Q Active Hub - LED states and what they mean.
The attached document should be used in conjunction with the supplied user manual which also contains relevant information. The document sets out the standard Q Active Hub LED states that you might see during the course of using your equipment