Q Active - Q. Why will my loudspeakers not work without the Hub?
Answer:
In order to make the Q Active loudspeakers truly ‘wireless’ and only requiring a power connection to each, the Q Active Hub is an integral part of the system where a wide range of inputs can be connected. It uses an RF Remote Control, is very compact, and it can be hidden away either with source equipment or at the Wi-Fi router depending on what connections are going to be used.
Related Articles
Q Active Hub - Q. My system isn't working correctly, can I reset it?
Answer. Yes, there are three parts to the Q Active System that can be reset if they are not functioning correctly, all three need completing if a full reset is required. Firstly the Remote Control, the reset on this is performed by pressing the 'NET' ...
Q Active - Q. Can I use the loudspeakers as powered monitors without the need of the Q Active Hub?
Answer: No, the Q Active Hub is required at all times as the connection method uses a proprietary wireless one. Setup Video
Q Active - Q. Are these loudspeakers Bluetooth?
Answer: The actual loudspeakers themselves are not Bluetooth, but the Hub to which they connect to is, it uses Bluetooth version 4.1 For a helpful video on how to use your Q Active system with Bluetooth, please take a look here
Q Active - White Paper
Please find attached the white paper for the Q Acoustics Q Active range, including the design brief, speaker overview, connectivity and much more! Note: Unauthorised redistribution, publication online or otherwise of the attached documentation and ...
Q Active - Q. Will music streamed from Spotify Connect be converted to 24bit 96kHz by the Q Active hub?
Answer: The link between the Q Active hub and loudspeakers is 24bit 96kHz, so when a turntable or other analogue device is connected to the hub, it goes into a 24bit ADC which then gets fed onto the loudspeaker at 24bit 96kHz. HDMI and Optical go ...