Q Media - Q. I have my Q Media system connected via analogue to the TV headphone out, but the system goes into standby after a short time?

• Related Articles

• Q Media M4 - Q. My soundbar won't come out of standby when TV is switched on?

  Answer: ​ When connected to an optical source, the unit has an AUTO-ON function and will come out of standby when it detects that an optical signal is present. This allows easy integration of the unit with your television, automatically turning on ...

• Q Acoustics M20 HD Loudspeaker User Manual

  Instructions for the setup, use and care of your Q Acoustics M20 HD active speakers.

• Q Acoustics M40 HD Loudspeaker User Manual

  Instructions for the setup, use and care of your Q Acoustics M40 HD active speakers.

• Q Media - Q. How do I use a Q Acoustics Soundbar with BT YouView?

  Answer: Unfortunately there is no punch-through capability on the YouView IR Remote, and online help from BT has confirmed this. Punch through is the common term for being able to programme your remote control to send IR codes to both a TV and an AV ...

• Q Media M2/M3 - Q. How do I control the volume on a Q Acoustics Soundbar/Soundbase with my TV's remote?

  Answer: Models M3 & M2 use an HDMI connection and as long as you connect it to the HDMI socket on your TV marked ARC, (normally HDMI 1), the TV output is set to PCM stereo and the TV's CEC is enabled (this is labelled differently per manufacturer, ...