Q Media - Q. Would I benefit from adding an external DAC for my analogue inputs?

• Related Articles

• M20 - Q. What DAC chip is used? Does the analogue input get digitised and run through the DSP engine before being converted back to analogue?

  Answer: There is no DAC (Digital to Analogue Converter) as such as the M20 amplifier operates in the digital domain. Digital input signals are acquired by a digital multiplexer, which then routes them directly to a DSP (Digital Signal Processor) for ...

• Q Media - Q. I have my Q Media system connected via analogue to the TV headphone out, but the system goes into standby after a short time?

  Answer: If you are connecting your Q Media system via it's analogue input to the headphone output of a TV, please ensure the TV's volume is set to high as lower volume settings reduce the signal being input, and the Q Media system will struggle to ...

• Q Media - Q. Why does my soundbar keep going into standby when I use an analogue input?

  Answer: Please be aware that when using an analogue source with it's own volume control,  that source device must be set to maximum so that the soundbar/soundbase is able to detect the full audio signal which will prevent it from going into standby.

• Q Acoustics - Q Media M3 Soundbar - CE Declaration of Conformity - 2017

  The attached is the CE Declaration of Conformity for the Q Acoustics Q Media M3 soundbar.

• Q Media - Q. Can I connect my PC or laptop to my Q Acoustics soundbar?

  Answer: We would suggest that you check that the graphics/sound card supports a HDMI ARC (Audio Return Channel) connection. If so, you will also need to ensure that your audio settings are set to stereo PCM/two channel rather than Dolby/multi-channel ...