Answer: The original production Q-M4 had a no Low Pass Filter (LPF) applied to the subwoofer output, later production after 2015 did have an LPF applied at 300Hz. If you would like to check whether or not your Q-M4 has the LPF applied, please email ...
Answer: The subwoofer output measures flat at low frequencies (down to 20Hz) and is 3dB down at 240Hz, rolling off at approximately 12dB/octave. Adding a subwoofer provides bass extension and extra weight, particularly when used with movie ...
Answer: We made the feet of the M4 soundbar removable so that if it was being wall-mounted you didn't need to attach them and have them hanging down underneath which might be unsightly. The feet MUST be used when the M4 is sat on a surface, not doing ...
Answer: The feet are like a shallow cone and are 25mm high. The diameter where each foot is attached to the Q m2 is 55mm and the diameter of its rubber inset foot is 23mm. Because of the downward facing enhanced bass driver, the Q m2 cannot be used ...